Take the 10 to 11 ltr Clean water (for 40 kg bag) in a bucket, add slowly HK Block Joint Adhesive and stir continuously for 5-10 minutes by using an electric mixer or by hand to obtain homogeneous lumps free mix. Smaller quantity can be also mi by manually and used in 3mm to 4 mm thin layer.
|Hard Drying||6 – 8 HR|
|Compressive Strength||8.5 Mpa|
|Flexural Strength||Flexural Strength 2.1 Mpa|
|Water REQUIREMENT||40 – 45 % MIXING OF PAINT FOR APPLICATION|
|Pot Life||2 TO 3 HR|
|Applied thickness each coat||1.5 mm|
|Coverage||12-15 Sq.ft/kg depending on wall finish|
HK Wall Putty is available in 40 kg of bag. It will cover 15 to 20 sq.ft. in 10 to 12 mm thickness. The coverage depends upon the substrate.
HK Wall Putty has a shelf life of 12 months from the date of manufacturing when kept at a temperature between 5c to 45c and store in the original unopened bags. All material shall be stored under cover in a manner that will prevent damage preferable on pallets and protected from excessive heat and moisture. Do not freeze
HK Wall Putty is non-hazardous. Freshly mixed cement is highly alkaline and may cause skin injury. Avoid creating and inhaling dust. Provide ventilation and respiratory protection. Wear skin and eye protection. Dust mask recommended. Please refer to (MSDS) material safety data sheet before using product.